MikroTik MTCNA Exam Syllabus

Start Free MTCNA Exam Practice After Reviewing the Topics

Before starting your MTCNA exam preparation, it is recommended to review the complete MikroTik Certified Network Associate exam syllabus and carefully go through the exam objectives listed below. Once you understand the exam structure and objectives, you should practice using our free MTCNA questions. We also provide premium MTCNA practice test, fully updated according to the latest exam objectives, to help you accurately assess your preparedness for the actual exam.

MikroTik MTCNA Exam Objectives

Section	Objectives
Module 1 Introduction	•About MikroTik •What is RouterOS •What is RouterBOARD •First time accessing the router •WinBox and MAC-WinBox •WebFig and Quick Set •Default configuration •RouterOS command line interface (CLI) •Null Modem cable •SSH and Telnet •New terminal in WinBox/WebFig •RouterOS CLI principles •<tab>, double <tab>, “?”, navigation •Command history and its benefits •Initial configuration (Internet access) •WAN DHCP-client •LAN IP address and default gateway •Basic Firewall - NAT masquerade •Upgrading RouterOS •Package types •Ways of upgrading •RouterBOOT firmware upgrade •Router identity •Manage RouterOS logins •Manage RouterOS services •Managing configuration backups •Saving and restoring the backup •Difference between a backup and an export (.rsc) file •Editing an export file •Resetting a RouterOS device •Reinstalling a RouterOS device (Netinstall) •RouterOS license levels
Module 2 DHCP	DHCP server and client •DHCP client •DHCP server setup •Leases management •DHCP server network configuration •Address Resolution Protocol (ARP) •ARP modes •RouterOS ARP table
Module 3 Bridging	•Bridging overview •Bridge concepts and settings •Creating bridges •Adding ports to bridges •Bridge wireless networks •Station bridge
Module 4 Routing	•Routing overview •Routing concepts •Route flags •Static routing •Creating routes •Setting default route •Managing dynamic routes •Implementing static routing in a simple network
Module 5 Wireless	•802.11a/b/g/n/ac Concepts •Frequencies (bands, channels) data-rates / chains (tx power, rx sensitivity, country regulations) •Setup a simple wireless link •Access Point configuration •Station configuration •Wireless Security and Encryption •Access List •Connect List •Default Authenticate •Default Forward •WPA-PSK, WPA2-PSK •WPS accept, WPS client •Monitoring Tools •Snooper •Registration table
Module 6 Firewall	•Firewall principles •Connection tracking and states •Structure, chains and actions •Firewall Filter in action •Filter actions •Protecting your router (input) •Protection your customers (forward) •Basic Address-List •Source NAT •Masquerade and src-nat action •Destination NAT •dst-nat and redirect actions •FastTrack
Module 7 QoS	•Simple Queue •Target •Destinations •Max-limit and limit-at •Bursting •One Simple queue for the whole network (PCQ) •pcq-rate configuration •pcq-limit configuration
Module 8 Tunnels	•PPP settings •PPP profile •PPP secret •PPP status •IP pool •Creating pool •Managing ranges •Assigning to a service •Secure local network •PPPoE service-name •PPPoE client •PPPoE server •Point-to-point addresses •Secure remote networks communication •PPTP client and PPTP server (Quick Set) •SSTP client
Module 9 Misc	•RouterOS tools •E-mail •Netwatch •Ping •Traceroute •Profiler (CPU load) •Monitoring •Interface traffic monitor •Torch •Graphs •SNMP •The Dude
Official Information	https://i.mt.lv/cdn/training_pdf/mtcna_outline_2019181161836.pdf

Limited Time Offer

50%

Off

Get Premium MTCNA Questions as Interactive Practice Test or PDF